Getting Ready To Use Flex Paste™

What You Need

• Protective gloves, clothing and eye wear

•  Cloth/rag or Paper towels

• Painters tape

• Plastic covering or tarp

• Flat head screwdriver

To get the most out of your Flex Paste, make sure you READ THE DIRECTIONS CAREFULLY. Then follow along with the blog for a comprehensive step by step guide.

It’s a good idea to wear protective gloves, clothing, and eye wear. Clean off your work surface. It needs to be free of grease, oil and dirt.

Protect areas that you don’t want Flex Paste to ensure clean lines. You can use painter’s tape and a drop cloth or plastic to protect other surfaces.

Using a flat head screwdriver, remove the lid. You see that moisture-absorbing silica pack? Remove it, put it aside and save it!

Then carefully remove the protective foil. Put it aside and save it. You’re going to need both your foil and silica pack later. Keep them safe.

Back to main menu. 

Visit How to Use Flex Paste and find everything you need to know about Flex Paste. From getting started to cleaning up, you’ve come to the right place for all the Helpful Hints and How-To’s that’ll make your Flex Paste experience a successful one…

Here’s everything you need to know about Flex Paste

How to use Flex Paste

How do I store Flex Paste?

How long does it take for Flex Paste to dry?

Flex Paste Helpful Hints

How Do I Clean Up Flex Paste

How do I apply Flex Paste

Using Flex Paste underwater

How do I use Flex Paste 9 oz cartridges?

 

Related Articles

How to Caulk a Bathroom Sink with Flex Shot

How To Seal a Sliding Glass Door with Flex Shot

How To Use Flex Super Wide Duct Tape

How to fix your favourite winter sports gear