Author: | Official Site – Flex Seal® Family Of Products

Free Shipping on Orders over $30 USD. Delivery times may be longer than usual. Click here to know more

/Carolina Aquino

About Carolina Aquino

This author has not yet filled in any details.
So far Carolina Aquino has created 31 blog entries.

How to Make a Bathroom Vanity with Flex Glue

2021-09-02T12:46:47-04:00

Kate Hollingworth has been a serial DIYer for 25 years and recently turned her love of home renovations into a thriving business where she designs and executes entire room overhauls in her client’s homes. She’s also a content creator on IG, showcasing innovative methods to create stunning DIY projects. And she’s an expert when [...]

How to Make a Bathroom Vanity with Flex Glue 2021-09-02T12:46:47-04:00

How do I clean up Flex Paste?

2021-08-24T00:48:02-04:00

Now that your project or repair is complete, it’s time to clean up. Make sure you don’t use water to clean uncured paste. Instead, use a clean dry cloth or paper towel. Mineral spirits and acetone help speed up the process of cleaning your work area. Here’s everything you need to know [...]

How do I clean up Flex Paste? 2021-08-24T00:48:02-04:00

How do I use Flex Paste 9 oz cartridges?

2021-08-24T00:50:04-04:00

How to use Flex Paste cartridges: Flex Paste 9 oz cartridges are designed for use in a caulk gun. Before loading into the caulk gun, be sure to follow the steps below. 1. Unscrew the cartridge tip. 2. Remove the nub with a sharp knife. Try not to remove any of the screw threads. [...]

How do I use Flex Paste 9 oz cartridges? 2021-08-24T00:50:04-04:00

How to Stop a Pool Leak with Flex Tape

2021-08-02T14:57:01-04:00

Nothing ruins a family BBQ or some fun in the sun like an unexpected pool leak. It’s inconvenient and pool liners can cost hundreds (sometimes thousands) of dollars to replace. That’s why we recommend keeping Flex Tape  nearby. The next time you find yourself with this problem, just use Flex Tape and your pool [...]

How to Stop a Pool Leak with Flex Tape 2021-08-02T14:57:01-04:00

Flex Paste Helpful Hints

2021-08-24T00:53:28-04:00

Spackle and joint compound require sanding, with Flex Paste light sanding is possible, but not recommended. Just smooth it to your desired finish, or add your own artistic texture. It’s all up to you! Don’t wipe any excess Flex Paste on the inside of your container, because that could lead to drying. Before your [...]

Flex Paste Helpful Hints 2021-08-24T00:53:28-04:00

How long does it take for Flex Paste to dry?

2021-08-24T00:55:12-04:00

Once Flex Paste is exposed to air or moisture or humidity it begins to cure, forming a skin within 15 to 30 minutes. Flex Paste FULLY cures within 24-48 hours. Remember, it is very important to replace the protective foil as much as possible while you are working to keep your unused Flex Paste [...]

How long does it take for Flex Paste to dry? 2021-08-24T00:55:12-04:00

How do I store Flex Paste?

2021-08-24T00:57:34-04:00

Remember that protective foil and silica pack? To prevent your Flex Paste from drying out, replace the protective foil by pressing it on the surface of the material. It is also very important to replace the silica pack too, to prevent Flex Paste from drying out. Continue pressing outwards so the foil remains in [...]

How do I store Flex Paste? 2021-08-24T00:57:34-04:00

How to use Flex Paste

2021-08-24T01:03:51-04:00

How do I apply Flex Paste? With Flex Paste, there is no need to shake or stir, it’s already ready to go! Grab a putty knife, trowel or similar tool, and remove an even layer of material from the top of the tub. Don’t scoop too deep! Scooping too deep can cause air pockets [...]

How to use Flex Paste 2021-08-24T01:03:51-04:00

Getting Ready to Use Flex Paste™

2021-08-24T01:06:29-04:00

What You Need • Protective gloves, clothing and eye wear •  Cloth/rag or Paper towels • Painters tape • Plastic covering or tarp • Flat head screwdriver To get the most out of your Flex Paste, make sure you READ THE DIRECTIONS CAREFULLY. Then follow along [...]

Getting Ready to Use Flex Paste™ 2021-08-24T01:06:29-04:00

Site Now Offering Full-Range of Flex Paste™ Products

2021-06-03T16:36:43-04:00

Flex Paste, our innovative new product from The Flex Seal® Family of Products, can now be sent directly to your home in Canada. “It’s very, very important to us that we provide convenience to our customers, especially during these times,” says Phil Swift, CEO, Inventor, and Spokesperson. “Our website now offers a wider variety of the [...]

Site Now Offering Full-Range of Flex Paste™ Products 2021-06-03T16:36:43-04:00