For projects around the house requiring an easy-to-use solution that’s super-strong and instantly bonds, seals, and repairs virtually everything, look no further, Flex Glue is here! There’s no need for screws or nails which can be an eyesore. Instead, rely on Flex Glue’s instant grab technology to make those repairs and projects easy to tackle. Whether your desired use is indoors or outdoors, Flex Glue is the perfect solution that can be used on dry or wet surfaces and can even be used underwater! Watch the video above for a step by step guide, or read on for more tips and information.
How to Use Flex Glue
1. Unscrew cap or nozzle.
2. Cut off tip of nub, above threading.
3. Replace and cut nozzle, then load into caulk gun (Flex Glue Pro only).
4. Apply to a surface free of dirt and oil.
Tips for Best Results
Please note that a caulk gun is required to use Flex Glue Pro. Regular Flex Glue does not require a caulk gun.
Apply liberally to the side of the surface being bonded. Press firmly for a minimum of 10-30 seconds for the instant grab to take hold. If needed, reposition object within 10 minutes of application. Allow 24-48 hours for curing. Flex Glue will reach the maximum strength in 7 days. When you are finished using regular strength Flex Glue, which comes in a squeeze tube, dispense a small amount out of the end and allow it to dry to form a plug. This will prevent the remaining Flex Glue from drying out. When you are ready to use it again, simply remove the plug at the end.
WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN. For more information about Flex Glue, please review our product page.