How do I apply Flex Paste?
With Flex Paste, there is no need to shake or stir, it’s already ready to go! Grab a putty knife, trowel or similar tool, and remove an even layer of material from the top of the tub. Don’t scoop too deep! Scooping too deep can cause air pockets that dry out the Flex Paste.
Apply a generous amount of paste to the surface using smooth even motions. It’s important to always allow each coat to dry before applying additional coats.
Remember to replace the protective foil as much as you can while working to prevent drying during application.
Can I apply Flex Paste on wet surfaces or underwater?
Yes, Flex Paste will work underwater and on wet surfaces. For best results, you may want to do some etching in order to increase adhesion. Also, you may need to apply a little extra Flex Paste when working underwater.