Flex Seal Mini

OVER 5,000 FIVE STAR REVIEWS*

PORTABLE LIQUID RUBBER IN A CAN 

All the strength of the original Flex Seal in portable size. Sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating that Stops Leaks Fast®. 

• Small roof and gutter repair

• Indoor and outdoor projects

• Seal cracks and holes

• Pools and pool equipment

• RV and motorhome repairs

• Auto and boat repairs

• Washroom fixes

• Repairs on the go

• Furniture repair and much more

Works on: Wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, drywall, rubber, cement, some types of vinyl and more.

Now all the strength of original FLEX SEAL® is available in powerful, portable Minis!

Flex Seal Mini is actually liquid rubber in a can! It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Available in 2 oz. size, in three colours: black, white or clear.

WARNING: California Prop 65 Notice

*Review count based on 5 star amazon.com reviews, collected between October 2011 and April 2022, and 5 star Bazaarvoice reviews from our retail partners, collected between June 2013 and April 2022.

DIRECTIONS

Read entire can. Wear face and eye protection, protective gloves, and clothing. Make sure the surface is clean, dry, and free of grease, oil, and dirt. Shake well. Spray 8” to 12” from surface, using an even, sweeping motion. Apply multiple, even coats until ALL cracks and holes have been filled.

IMPORTANT: Allow 24 to 48 hours to dry before applying another coat.

Let it dry completely. (It usually takes up to 24 to 48 hours to fully cure.)

*Use Flex Seal ONLY in a well-ventilated area. When using inside, prevent vapor build-up by opening doors and windows. Ensure fresh air entry during application and drying.

*Do not use near heat, sparks, pilot lights or other sources of ignition.

FLEX TIPS:

Spray a larger area than area where the leak is and feather the edges. For best results, apply multiple coats rather than one thick coat and use at can temperatures above 60ºF.Make sure Flex Seal has filled ALL cracks and holes and is FULLY CURED before testing product. If light can pass through, apply additional coats.